Embedded System Products Embedded Systems Featured

Industrial CAN Bus And SAE J1939 Prototyping Board With ARM Cortex-M3 Processor

jBoard-X2 - Industrial CAN Bus / SAE J1939 Prototyping BoardThe jBoard-X2 is an industrial-strength embedded system employing the vast capabilities of the NXP LPC1768 (ARM Cortex M3) processor.

The NXP LPC176x are Cortex-M3 microcontrollers for embedded applications featuring a high level of integration and low power consumption at frequencies of 100 MHz (120 MHz for LPC1769 and 1759). Features include up to 512 kB of flash memory, up to 64 kB of data memory, Ethernet MAC, USB Device/Host/OTG, 8-channel DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general-purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 70 general purpose I/O pins. The LPC176x are pin-compatible to the 100-pin LPC236x ARM7 series.

The board includes:

  1. Two CAN Bus Interfaces
  2. One RS232 Port
  3. One RS485 Port
  4. On-Board Flash Memory for parameter storage
  5. One serial interface with CP2102 (USB to RS232 interface, supports ISP download).
  6. RJ45-10/100M Ethernet network interface (Ethernet PHYLAN8720A).
  7. USB 2.0 interface, USB host and USB Device interface.
  8. TF SD / MMC card (SPI) interface.
  9. Real-Time Clock
  10. Two user button, one Reset button and ISP button , one INT0 buttontwo user-programmable LED lights.
  11. Serial ISP download, Standard 20-pin JTAG download simulation debugging interface.
  12. External 7 to 28 VDC supply, external 5 VDC power supply, or USB 5 VDC supply.
  13. Extended temperature range: -40 ° C to +85 ° C

More Information…